TriNav Marine Brokerage – International Shipbrokers, Boat Brokers, Marine Brokers, Canada

50' Steel Stern Dragger

Listing # DR4371

JUST LISTED

Hull Type	Steel
Length (LOA)	50 ft.
Registered Length	45 ft.7 in.
Breadth	16 ft.3 in.
Depth	9 ft.1 in.
Draft	7 ft.0 in.
Year Built	1980
Built By	Steven Eldridge
Rigging	Dragger
Gross Tons	43
Cruise Speed	8

Send Offer or Inquiry

Specifications

Federal Permits	Please see comment section for details
Capacities	Fuel: 1400 gallons of Diesel
Propulsion	Main Engine: 480HP, CAT C-18 Diesel Engine Built: 2006 Transmission: Twin Disc 516 Gear Ratio: 4.1:1 Shaft Size: 3" Aquamet Stainless (new 2016) Propellor: 50" - 4 blade (Kort Nozzle) Steering Type: Dual Ram Hydraulic Steering (new 2016)
Auxiliary Engines	Northern Lights - 20 KW (new 2016 - approx 1,200 hrs)
Safety Equipment	Revere - 4 person life raft ACR EPIRB USCG Safety Inspection sticker (expires 2018) (2) Life rings (4) Survival suits All other USCG required
Accommodations	4 berths own forward Full galley down forward Single basin sink (limited amount of freshwater capacity) No head
Deck Equipment	Pullmaster H-18 Split Hydraulic Main Trawl Winches (200 fathom of 5/8" wire) stainless Cargo winch - Kinematic - mounted at base of the mast (2) Pullmaster PL-2 boom mounted winches (2) Pullmaster PL-2 Outrigger winches 10' Stainless Steel Conveyor w/sump Tiburon Trawl Doors (1) Groundfish net/ fluke net (1) Squid/whiting net (new 2015) (1) 8" High rise net All ground gear is stainless steel (2) Center stern mounted net reels over the single stern ramp (made from heavy gauge aluminum) Mast is approx 20' steel pipe measuring approx 10" at the base and tapering to approx 8" at the tip Fish hold measures approximately 1,600 cubic ft: 5' height x 16' width x 20' length. Can hold approx. 30,000 lbs of squid Outriggers are approximately 25' of 4" steel Forward mounted net reel is chain driven by a Char-Lynn 10,000 series motor 25,000 lbs capacity of fish hold
Comments	Vessel underwent approximately $ 100,000 in upgrades at the Derektor Shipyard in 2016): Work included - sandblasting of the bottom, new rudder, new cutlass bearing, deck - was sandblasted and had Interlux rubber system applied *Wheelhouse has new windows. Wheelhouse steel will need to be refreshed in the future.* *The vessel is currently fishing and can be inspected upon sufficient notice to broker.* *Vessel has been owner-operated by current owner since 1989.*
Price	$126,223 CAD \| $89,000 USD

Send Offer or Inquiry

** The information given is believed to be correct but cannot be guaranteed **