65' Steel Gladding & Hearn Lobster Boat
Listing # LB6259
REDUCED PRICE
| Hull Type | Steel |
| Length (LOA) | 65 ft. |
| Breadth | 18 ft.4 in. |
| Depth | 6 ft.8 in. |
| Draft | 7 ft. |
| Year Built | 1980 |
| Built By | Gladding & Hearn |
| Rigging | Lobster |
| Gross Tons | 55 |
| Top Speed | 9 |
| Cruise Speed | 8 |
| RSW: | Yes |
Capacities |
Hold Capacity: 27800 lbs of Lobster Fuel: 2400 gallons of Diesel |
Propulsion |
Main Engine: 385HP, Cummins 855 Diesel Engine Rebuilt: 2019 Transmission: Twin Disc Gear Ratio: 3:1 |
Safety Equipment |
Life Raft Life Ring |
Accommodations |
5 Berths 1 Cabin Electric Stove Washroom Shower AC Unit X2 |
Electronics |
Radar: Furuno 1945 Plotter: PC Winplot & North Star 951X Sounder: Furuno FCV 295 VHF: x2 SSB: Yes AutoPilot: Sim Rad AP-60 GPS: North Star & Furuno GP-32 |
Deck Equipment |
16" Offshore Lobster Hauler Steel Mast & Boom 20 Ton RSW (4) RSW Tanks with a capacity of 27,000 lbs of lobster/crab |
Comments |
in 2021 the boat had many renovations to include a new twin disc 3/1 gear, new shaft and bearings, bottom zinks and bottom painted, new heaters, electric stove, pacer pumps, bilge pumps. The Whole vessel has been chipped and painted inside and out. The living quarters were also renovated with new interior. The main deck was re-coated and painted. The 855 Cummins was rebuilt in 2019 the engine runs perfectly and burns no oil between oil changes. The hours on the main engine are unknown, the boat is extremely efficient, only burning 85 gallons every 24 hours. The owner also purchased a factory new 15 liter 500 HP Cummins that will go with the boat. The boat has 3 below deck RSW tanks (1) 20,000 lbs. and (2) 3,000 lbs and one aluminum on deck tank that holds 1,800 lbs. The Cummins Gen Set is 45KW and only has 3,200 hours. |
Price |
$600,000 $818,913 CAD | $575,000 USD |
** The information given is believed to be correct but cannot be guaranteed **